Portable Micro Cooler

Feel free to our online store, which is Alphacooler: https://www.rigidhvac.com/online-order

The Micro Cooler accomplishes its impressive power-to-size ratio through its exceptional rotary micro-compressor, which is one of the most efficient in the world. This tiny yet mighty component produces as much cooling power as a compressor five times its size, making it the powerhouse of our cooling system.

For longer system life, the Coolant Formula includes propylene glycol a subtle fungicide, and distilled water as well.

The Micro Cooler stands out from the crowd in several ways:

1. Ice-Free Operation: Unlike many cooling systems, the Micro Cooler doesn’t rely on ice. It can efficiently run on distilled water or a glycol water mixture of your choice.
2. Continuous Cooling: This system operates on a continuous cooling cycle, meaning it will keep you cool as long as it’s running.
3. Lightweight and Compact: The Micro Cooler is incredibly light and compact, with a fluid flow rate of 20 liters per minute at 16 psi. Its powerful rotary micro-compressor matches the performance of systems five times its size.
4. Zero Maintenance: This system is virtually maintenance-free, and you have the flexibility to set and change the temperature according to your preferences.

In action, the AlphaCooler can effectively chill to as low as 32℉ (0℃) when the outside temperature is a scorching 122℉ (50℃).

You have the flexibility to adjust the operating temperature, with a range from 35º to 70º. However, our recommended setting is 50º F (10 ℃). Studies have shown that temperatures below 55º can cause capillaries just beneath the skin to close, trapping heat in the body. The sweet spot is around 50º – 60º for the torso and vital body regions, ensuring effective cooling from your core.”

The Micro Cooler operates on a continuous cycle, and the frequency of coolant refills depends on your driving schedule and how frequently you use the system. To keep it running smoothly, it only needs about 5 ounces (145 ml) of a four-to-one coolant formula to distill the water mixture. We recommend topping it off before every use to ensure the system doesn’t run out of coolant.

The Micro Cooler measures 11.8 inches in length, 6.7 inches in width, and 6.7 inches in height. When empty, it weighs 10.0 pounds, and with fluid, the mounting plate, and pins connected, it’s just 15 pounds.

When the outside temperature is a scorching 110º, the Micro Cooler can effectively chill to as low as 35º F, although it’s electronically limited to that temperature.

You have the flexibility to adjust the operating temperature, ranging from 35º to 70º. However, our recommended setting is 55º F. Research has shown that temperatures below 55º can cause the capillaries just below the skin to close, trapping heat. The most effective range is around 55º – 60º for the torso and vital body regions, ensuring core cooling.

Purchasing link: https://www.rigidhvac.com/store/products/heavy-duty-cooling-suit

1. The cooling suit cools: 37℉ to 70℉
2. One size fits most: 110lbs ~220lbs
3. Quick coupling connector included
4. Vest weights: 4.5 pounds when fully loaded with water

Features:

1. Neat zipper fastening
2. Washable in a regular laundry
3. Side elastic straps fit a wide range of body sizes
4. 70 feet long of insulated tubing and an auto-drain quick connector
5. Fabrics: 100% cotton fabrics treated with a flame-retardant finish

The Micro Cooler features a convenient digital display on its top, which shows you the current temperature. You have the option to control and adjust the temperature using the user interface or a wired remote control that can be mounted on your dashboard. The set temperature is displayed on the remote control for easy monitoring.

The Micro Cooler has the capability to cool up to two garments at the same time, depending on factors like the outside temperature, the car, and the installation setup.

For a 12-volt Micro Cooler, it can draw a maximum of 20 amps, but this can vary depending on the surrounding temperature. On average, it typically draws around 7 to 12 amps. As for the 24-volt Micro Cooler, it draws about half the amperage of the 12-volt version.

In extreme temperatures, such as around 120º, our system utilizes approximately 330 watts at maximum.

To ensure proper operation and safety, we strongly recommend the following: adding an inline fuse within 6 inches from the power supply, using an ACC trigger wire, placing spacers (1 to 1.5 inches) between the cooler and the floor pan to promote air circulation, incorporating inline fans, and using NACA ducting to prevent heat soak and high amp draw. Ensuring that cooler ambient air is directed to the Micro Cooler’s intake can significantly impact the power draw rate.

You can easily tell if your Micro Cooler cooling shirt is operational by following these indicators:

Sensation: You’ll feel the cooling effect gradually. It may take up to four minutes to reach the set temperature, and you’ll notice the shirt getting cooler as time passes.

Digital Display: Keep an eye on the digital display, as it will show the changing temperature during operation.

Visual Confirmation: You’ll be able to see the specially formulated mixture (slightly bluish) flowing through the tubes, confirming that the system is actively cooling.

It’s important to note that the system works as a circuit and won’t start cooling unless a garment is connected to the Micro Cooler. If you encounter any issues where the system appears to be running but the shirt isn’t getting colder, follow these troubleshooting steps:

Double-Check Connectors: Ensure that all connectors are inserted securely. If any connector is not fastened properly, the shirt won’t cool, and the digital display might show an “E2” error.

Verify Coolant Level: The system must always have the coolant formula in the reservoir to function correctly.

Reset the System: Try resetting the system by turning it off and on again. You can also disconnect the power cable from the unit and re-plug it. Shaking the system with fluid in the reservoir can also help re-lubricate the internals and resolve an E2 error code.

Seek Professional Assistance: If you’ve tried the above steps and are still experiencing difficulties, contact our service number and describe the issue or send pictures via email of your installation to our team members. Often, when we assess the installation, we can provide a quicker solution.

Note: Sometimes, the system will protect itself by cutting off if it detects an error code, such as low coolant level or improper connectors.

The advantages of the Micro Cooler, based on the provided information, include:

1. Efficient Cooling: The Micro Cooler is capable of providing effective cooling even in extreme temperatures. It can chill to as low as 32°F (0°C) when the outside temperature is 110°F (43.3°C), making it a reliable solution for staying cool.
2. Customizable Temperature: Users have the flexibility to adjust the operating temperature within a range of 35°F to 70°F (1°C to 21°C). The recommended setting is around 55°F (13°C) for optimal cooling without causing capillaries to close.
3. User-Friendly Interface: The digital display on the Micro Cooler makes it easy to monitor the current temperature. Users can control and adjust the temperature through the user interface or a dash-mounted remote control.
4. Ice-Free Operation: Unlike many other cooling systems, the Micro Cooler doesn’t require ice to function. It runs on a coolant formula or distilled water mixture, reducing the need for maintenance and additional resources.
5. Power Efficiency: The system is designed to be power-efficient, with a low amp draw. For example, a 12-volt Micro Cooler draws around 7 to 12 amps, and a 24-volt version draws even less.
6. Multiple Garment Cooling: Depending on the conditions, the AlphaCooler can cool up to two garments at the same time, making it a versatile solution for different applications.
7. Compact and Lightweight: The Micro Cooler is relatively compact, with dimensions of 11.8″ x 6.7″ x 6.7″, and weighs less than 15 pounds, making it easy to install and use in various settings.
8. Maintenance and Troubleshooting: The system has built-in safeguards, such as error codes and automatic shutdown when there are issues like low coolant levels or connector problems. Troubleshooting steps are provided for users to address these issues, making it user-friendly.
9. Versatile Applications: The Micro Cooler can be used in a wide range of applications, including racing, medical, firefighting, the military, and more, where maintaining a comfortable core temperature is crucial.
10. Superior Power-to-Size Ratio: The system’s rotary micro-compressor is highly efficient and can produce cooling power equivalent to compressors five times its size, ensuring exceptional cooling performance in a compact package.

In summary, the Micro Cooler offers efficient and customizable cooling, is user-friendly, requires minimal maintenance, and is suitable for various applications, making it a valuable solution for staying cool and in control in challenging conditions.